Fully Automatic Paper Cutter Spring Pressure

Sikandar Machines offers a heavy weight in Semiauto type Paper Cutting Machine converted to Hydraulic Clamping Fully Automatic Economic Model
email: sikandarmachines@gmail.com
Paper Cutting Machine Spring Pressure Model 109

Fully Automatic Paper Cutter Spring Pressure
EXAMINE OUR STRONG POINTS of Fully Automatic Paper Cutter Spring Pressure
CUTTING LINE CHECK :

Low Pressure, when the clamp is used to help align the stock, it is operated by a foot pedal & cutting line is checked while the pressure remains low.

WHILE MAKING THE CUT :

After checking at low pressure when we press the two electric push buttons to make a cut high spring pressure sets down on the paper stock to grip it for cutting accurately.

OPERATION :

The Fully Automatic Paper Cutter Spring Pressure is operated all through ELECTRIC PUSH BUTTONS & transmission of power is through Electro-Magnetic Clutch and brake system.

TWO HANDED CUTTING CYCLE SWITCH :

To make cut, you must press both cutting buttons simultaneously till the knife starts. If either one is released or both is released the machine stops immediately.

PHOTO ELECTRIC SAFETY GUARD :

The photo electric transmitter receiver sensors are used for safety measures . If anything obstructs the infra red beams, the knife stops immediately. The positive drive of the machine ensures that when the knife is moving up after cutting the stock it stops only at its desired position.

MOTORISED BACK GAUGE :

Motorised back gauge is inbuilt for this semi automatic paper cutter.

GENERAL DESCRIPTION :

The cast iron frame has been reinforced for extra strength. It's sturdy.design eliminates all risks of vibration & excessive strain. The smooth cutting cycle is fast & accurate, even when you're cutting hard material or high stock.
The fast cutting stroke is very accurate, to the knife carrier guides. All sliding surfaces have been precisely ground, guarantee of dependable precision & long service life.
The back gauge which moves smoothly is guided precisely on a coloumn & side plates length up to knife carrier ensures a right angle cut even at the smaller length of the stock. The hand wheel mechanism provides comfort to the operator for the fine edjustments of the cutting marks,when working in manual mode of programe.
Simple & safe knife change, knife guides provided with the machine, helps removing of the knife easily avoiding any danger to the operator & provision of hand switch locks the mains motor running while process is carried out, avoiding any chances of accidents.

Specification

STANDARD EQUIPMENT OPTIONAL EQUIPMENT
* Two knives * Electronic D.R.O.Scale
* Photoelectric safety guard * Air floating table
* Two side stock tables
* Two front table side plates
* Two rear table side plates
* Detachable clamp plate
* Cutting line check with foot padal
* Motor with electrical equipment for AC
* Two-handed trigger for cutting cycle
* knife changing kit
* Complete set of tools
* Operators manual
TECHNICAL SPECIFICATION
DESCRIPTION Model Economic 85 Economic 109
Cutting Width mm 850 1090
Cutting Length mm 850 1090
Pile Height mm 125 125
Cutting Speed rpm 36 36
Front Table Depth mm 590 590
Power Consumption H.P. 3.5 3.5
Gross Weight kg 2000 2300