Semi Automatic Paper Cutting Machine India

Sikandar Machines offers Simple Paper Cutting Machine Guillotine Cutter, MANUAL PAPER CUTTING MACHINES, paper guillotines cutters, paper cutter hand operated,Ordinary Paper Cutting Machine

Sikandar Machines always welcome your quiries, please contact us at
email: sikandarmachines@gmail.com
Semi Automatic Paper Cutting Machine -Specialised Model-

Semi Automatic Paper Cutting Machine India
EXAMINE OUR STRONG POINTS of Semi Automatic Paper Cutting Machine India
NO SLIP OF KNIFE :

Because there are no slots to provide slip in knife carrier cast iron part of machine.Direct holes ensures total grip of knife while making a cut.
Some other manufacturers provide slots to fit the steel knife in semi automatic paper cutter or even in Fully Automatic Paper Cutting Machines(this information is only for comparison)Slots always provide the way to slip of knife while cutting in some cases.

NO SLIP OF CLUTCH & NO SOUND OF GEARS :

Electro Magnetic Clutch ensures total Grip of power from motor to the cutting stock of any paper or boards,no sound of Gears due to oil dipped bronze gear box for noiseless running for long life of machine.

CORRECT PILE HEIGHT & LABEL CUTTING ARRANGEMENT :

Semi Automatic Paper Cutting Machine India & Fully Automatic Paper Cutting Machines ensured.

SAFETY IN OPERATION :

Safety is achived by two handed cutting cycle switch,photo electric safety guard and A.C.fail safe brake.

OPERATION :

The Semi Automatic Paper Cutting Machine India is operated all throgh ELECTRIC PUSH BUTTONS & transmission of power is through Electro-Magnetic Clutch and brake system.

TWO HANDED CUTTING CYCLE SWITCH :

To make cut, you must press both cutting buttons simultaneously till the knife starts. If either one is released or both is released the machine stops immediately.

PHOTO ELECTRIC SAFETY GUARD :

The photo electric transmitter receiver sensors are used for safety measures . If anything obstructs the infra red beams, the knife stops immediately. The positive drive of the machine ensures that when the knife is moving up after cutting the stock it stops only at its desired position.

CUTTING LINE CHECK :

Cutting line check by foot padel.

MOTORISED BACK GAUGE :

Motorised back gauge is inbuilt for this semi automatic paper cutter.

GENERAL DESCRIPTION :

The cast iron frame of Semi Automatic Paper Cutting Machine India has been reinforced for extra strength. It's sturdy.design eliminates all risks of vibration & excessive strain.

The smooth cutting cycle is fast & accurate, even when you're cutting hard material or high stock.

The fast cutting stroke is very accurate, to the knife carrier guides. All sliding surfaces have been precisely ground, guarantee of dependable precision & long service life.

The back gauge of paper cutter which moves smoothly is guided precisely on a coloumn & side plates length up to knife carrier ensures a right angle cut even at the smaller length of the stock. The hand wheel mechanism provides comfort to the operator for the fine edjustments of the cutting marks,when working in manual mode of programe.

Simple & safe knife change, knife guides provided with the machine, helps removing of the knife easily avoiding any danger to the operator & provision of hand switch locks the mains motor running while process is carried out, avoiding any chances of accidents.

Specification

STANDARD EQUIPMENT OPTIONAL EQUIPMENT
* Two knives * Electronic D.R.O.Scale
* Two side stock tables * Photo Electric Safety Device
* Two front table side plates * Detachable clamp plate
* Two rear table side plates * Cutting line check with foot padal
* Motor with electrical equipment for AC
* Two-handed trigger for cutting cycle
* Knife changing kit
* Complete set of tools
* Operators manual
TECHNICAL SPECIFICATION of Semi Automatic Paper Cutting Machine India
MODEL NO SMSM 85 SMSM 109
Cutting Width mm 850 1090
Cutting Length mm 850 1090
Pile Height mm 125 125
Cutting Speed rpm 36 36
Front Table Depth mm 590 590
Power Consumption H.P. 3.5 3.5
Gross Weight kg 2000 2300