Cnc Operated Fully Automatic Paper Guillotine Machine

The SIKANDAR Cnc Operated Fully Automatic Paper Guillotine Machine Hydraulic Clamping Fully Automatic Paper Cutting Machine with Sturdy cast Iron Frame, Has best Hydraulic System, With Air Table for easy & friction free movement of paper, Oil Dipped Bronze Reduction Gear Box for Noiseless & long Running Life, Photo Cell Safety Device Two handed Cutting Cycle Switch for operators Safety PROGRAMMATIC HYDRAULIC CLAMPING GUILLOTINE MACHINE is very sturdy, very heavy duty & best machine for today's & tomorrows needs. SIKANDAR Electric Paper Guillotines has best operating & quality control features. Cnc Operated Fully Automatic Paper Guillotine Machine WITH AIR TABLE The maximum safety in operation is achieved by standard norms and avoiding usage of unnecessary pipe fittings for leak proof workings.
email: sikandarmachines@gmail.com
CNC Paper Cutting Machine
Cnc Operated Fully Automatic Paper Guillotine Machine
GO TO MAIN MACHINE USING THIS CONTROLLER: CLICK HERE CNC CONTROL :

The machine is provided with a built in program having 99 programes and 99 cuts in each programe with total number of cut memory 1500 cuts.To built program is very easy and users friendly.The Complete operating Book with guidelines is provided with the machine,however if you need to read it before purchasing the machine, please e mail us,we will send pdf file attatchment.

OPERATION :

The machine is operated all throgh ELECTRIC PUSH BUTTONS OR THROGH CNC & transmission of power is through Electro-Magnetic Clutch and brake system.

TWO HANDED CUTTING CYCLE SWITCH :

To make cut, you must press both cutting buttons simultaneously till the knife starts. If either one is released or both is released the machine stops immediately.

DOUBLE STROKE PREVENTION :

The machine is provided with a unique safety device that prevents double knife strokes, means pressing of both cutting buttons continuously will not allow the knife to come down unless & until it is released & pressed again.

PHOTO ELECTRIC SAFETY GUARD :

The photo electric transmitter receiver sensors are used for safety measures . If anything obstructs the infra red beams, the knife stops immediately. The positive drive of the machine ensures that when the knife is moving up after cutting the stock it stops only at its desired position.